Animales de Laboratorio
Principal Arriba Novedades Contacte con nosotros Servicios

UNIT FOR THE ISOLATION AND PROTECTION OF  LABORATORY ANIMALS

UA-I  and  UA-II

uap.jpg (24962 bytes)

Ideal for:

Mice, rats and rabbits genetically modified, microbiologically inoculated, Immunologically depressed, etc...

Three different configurations available:

  • All floors with the same air supply, the aire is shared among all the animals inside.
  • Each floor have an independent air supply.
  • Stackable individual modules, each one with its own air supply, you decide how many floors you need.

Working principle
The units can be configured  to work under positive (animal protection) or negative (user protection) pressure.

  • Positive pressure:
    The air is taken from the environment prefiltered through a high retention washable filter (95% for 5µm) and sterilized by means of an ULPA filter (efficacy of the 99.9997% for 0.3µm), said air is given to the animals with a ratio of 20-25 recirculation per hour, once swept the zone of storage of animals the air filters for a washable filter of retention of particles (95% for 5µm) and it is expelled to the exterior. An interior overpressure of between 2 and 4 mm of water column is always maintained.
  • Negative pressure:
    The air is taken from the environment, prefiltered through a filter of discharge retention (95% for 5µm) and given to the animals with a ratio of 20-25 recirculation per hour, once swept the zone of storage of animals the air is filtered through a washable filter of retention of particles (95% for 5µm), sterilized by means of an ULPA filter (efficacy of the 99.9997% for 0.3µm), and expelled to the exterior. It always maintains an interior underpressure of between 3 and 5 mm of water column.

Construction:

  • Module for the storage of animals:
    • Structure on welded PVC
    • Dismountable windows in frame of PVC and transparent panel of Plexiglas.
  • Support module.
    • Manufactured of steel painted in epoxy of high resistance to the laundry and the abrasion.
    • Motor blower of low level of noise and high yield.
    • High efficacy ULPA filter  (99,9997% for particles of 0.3 µm).
      Electronic control of the speed of the motor.
    • Washable prefilter with high retention (95% at 5µm) capability
    • Electronic control of the motor blower

Optional equipment

  • Secondary storage unit without motor. Uses de capabilities of the main units (designed to do that)
  • Programmed illumination system composed by:
    • Blind dark doors
    • Independent chronometers for each floor.
  • Digitally controlled heating system
  • Additional odors filtration with activated charcoal.

 Dimensions:

UA I Width High Depth separated floors
 Overall 1300 1960 530 Floor high Door aperture mm
 Storage zone 1050 1290 525 323 258 mm
UA II Width High Depth separated floors
 Overall 1530 2470 710 Floor high Door aperture mm
 Storage zone 1325 1800 705 450 380 mm

Special sizes can be made upon request

 

Envíe un mensaje a  webmaster@euroaire.com con preguntas y comentarios acerca de esta zona Web.
Copyright © 2003 EUROAIRE
Ultima actualización: 12/04/2003